啊啊

NEWS CENTER

新聞動態

您現在的位置:
首頁
/
/
/
離心機廠家:臥螺機的特點用途介紹 (Centrifuge manufacturer: introduction of the features and uses of horizontal screw machine)

離心機廠家:臥螺機的特點用途介紹 (Centrifuge manufacturer: introduction of the features and uses of horizontal screw machine)

  • 分類:行業新聞
  • 作者:離心機廠家
  • 來源:www.z8om.com
  • 發布時間:2021-03-17
  • 訪問量:0

【概要描述】離心機廠家:臥螺機是利用離心沉降原理分離懸浮液的設備。它的工作原理是當要分離的懸浮液進入離心機的轉鼓里后,比液相密度大的固相顆粒再轉鼓的離心力作用下快速沉降到轉鼓內壁,離心機內部的螺旋輸送器把沉積在轉鼓內壁的固相推向轉鼓小端的干燥區進一步脫水,然后經出渣口排出,分離后的清液則從轉鼓大端流出。

Centrifuge manufacturer: Decanter screw machine is the use of centrifugal sedimentation principle to separate the suspension of equipment.
It works when it comes to separation of the slurry into the centrifuge drum, of solid phased particles larger than the density of the liquid phase of drum rapid subsidence under the action of centrifugal force to the inner wall of the drum, the inside of the centrifuge spiral conveyor deposit on the inner wall of the drum, solid phase into the drum to the small area further dehydration, drying and then by the slag discharge mouth, after the separation of the liquid is flowed from drum big end.

離心機廠家:臥螺機的特點用途介紹 (Centrifuge manufacturer: introduction of the features and uses of horizontal screw machine)

【概要描述】離心機廠家:臥螺機是利用離心沉降原理分離懸浮液的設備。它的工作原理是當要分離的懸浮液進入離心機的轉鼓里后,比液相密度大的固相顆粒再轉鼓的離心力作用下快速沉降到轉鼓內壁,離心機內部的螺旋輸送器把沉積在轉鼓內壁的固相推向轉鼓小端的干燥區進一步脫水,然后經出渣口排出,分離后的清液則從轉鼓大端流出。

Centrifuge manufacturer: Decanter screw machine is the use of centrifugal sedimentation principle to separate the suspension of equipment.
It works when it comes to separation of the slurry into the centrifuge drum, of solid phased particles larger than the density of the liquid phase of drum rapid subsidence under the action of centrifugal force to the inner wall of the drum, the inside of the centrifuge spiral conveyor deposit on the inner wall of the drum, solid phase into the drum to the small area further dehydration, drying and then by the slag discharge mouth, after the separation of the liquid is flowed from drum big end.

  • 分類:行業新聞
  • 作者:離心機廠家
  • 來源:www.z8om.com
  • 發布時間:2021-03-17
  • 訪問量:0
詳情

       離心機廠家:臥螺機是利用離心沉降原理分離懸浮液的設備。它的工作原理是當要分離的懸浮液進入離心機的轉鼓里后,比液相密度大的固相顆粒再轉鼓的離心力作用下快速沉降到轉鼓內壁,離心機內部的螺旋輸送器把沉積在轉鼓內壁的固相推向轉鼓小端的干燥區進一步脫水,然后經出渣口排出,分離后的清液則從轉鼓大端流出。

     Centrifuge manufacturer: Decanter screw machine is the use of centrifugal sedimentation principle to separate the suspension of equipment. It works when it comes to separation of the slurry into the centrifuge drum, of solid phased particles larger than the density of the liquid phase of drum rapid subsidence under the action of centrifugal force to the inner wall of the drum, the inside of the centrifuge spiral conveyor deposit on the inner wall of the drum, solid phase into the drum to the small area further dehydration, drying and then by the slag discharge mouth, after the separation of the liquid is flowed from drum big end.

臥螺機

       這款臥螺機能在全速運行狀態下連續進料、分離、洗滌和卸料。具有結構緊湊、連續操作、運轉平穩、適應性強、生產能力大、維修方便等特點。適合分離含固相物粒度大于0.005mm,濃度范圍為2-40%的懸浮液。
 

The recumbent screw can continuously feed, separate, wash and discharge at full speed. It has the characteristics of compact structure, continuous operation, smooth operation, strong adaptability, large production capacity and convenient maintenance. It is suitable for separating suspension with solid particle size greater than 0.005mm and concentration range of 2-40%.


離心機廠家:選擇合適的臥螺機不僅可以解決生產問題、提高工作效率,同時也節約了生產成本,降低了經營風險。
 

Centrifuge manufacturers: choose the right horizontal screw machine can not only solve the production problems, improve work efficiency, but also save production costs, reduce the risk of operation.
 

臥螺機的特點:

       1、采用漸開線行星齒輪差速器、傳動比大、精度高。
       2、整機設有機械電器雙重過載保護裝置、使用安全。
       3、工頻調速型主電機配液力偶合器、電機運轉平穩。
       4、與物料接觸部選用優質不銹鋼材料、耐腐蝕性強。
       5、整機采用整體機架結構、吊裝安全方便、占地面積少。

Features of horizontal screw machine:

1. Adopt involute planetary gear differential, with large transmission ratio and high precision.
2, The whole machine is equipped with mechanical and electrical overload protection device, safe in use.
3. The main motor of power frequency speed-adjusting type is equipped with hydraulic coupling, the motor runs smoothly.
4. The contact part with the material is made of high quality stainless steel material with strong corrosion resistance.
5. The whole machine adopts the whole frame structure, which is safe and convenient for hoisting and occupies less area.



臥螺機用途:

       離心機廠家:設備洗滌效果好,處理能力大,經濟效率高,它可在全速運轉時對懸浮液進行自動連續地進料、洗滌、脫水和卸料。是固液分離中高效的分離設備。這種機器主要適用于化工、制藥、食品、治金、礦山等行業固液分離,分離懸浮液固相在10%-80%固相顆粒直徑在0.13-5mm(0.2-2mm效果尤佳)范圍內的線狀或結晶狀的固體顆粒。

 

Horizontal screw machine use:

Centrifuge manufacturer: the equipment has good washing effect, large processing capacity and high economic efficiency. It can automatically and continuously feed, wash, dehydrate and discharge the suspension when running at full speed. It is an efficient separation equipment in solid-liquid separation. This machine is mainly used for solid liquid separation in chemical, pharmaceutical, food, gold, mining and other industries. It separates linear or crystalline solid particles in the range of 10%-80% solid phase particle diameter 0.13-5mm(0.2-2mm is the best effect) of suspension liquid.

關鍵詞:

掃二維碼用手機看

- 手機版 莫尼亞 -

moniya

南京莫尼亞離心機科技發展有限公司

聯系人:徐先生17705185671    劉先生13382761960
電話/傳真:025-58474011
郵箱: njmoniya@163.com 

網址:www.z8om.com
公司地址:江蘇省南京市六合區竹鎮工業園凌峰路71號

售后服務:

南京莫尼亞離心機科技發展有限公司

聯系人:趙先生18013344029

常測

Copyright ? 2019 南京莫尼亞離心機科技發展有限公司

網站建設:中企動力 南京

蘇ICP備05064655

日本熟妇hd人妻